The Mitico RDTA
Check out the photo gallery here: http://e-phoenix.ch/gallerie/
Buy it here: https://shop.e-phoenix.ch/boutique/the-mitico-rdta/
The Mitico by E-Phoenix is a top of the range RDTA with a diameter of 16mm for an MTL vape, up to an indirect restrictive vape.
The first 16mm RDTA on the market will delight those looking for extreme flavours.
We made a small tank (RDTA) to avoid frequent opening of the top cap to check if the cotton is still wet. To know when to squonk again, you just have to take a look at the tank.
Its deck has been designed to offer an unsurpassed ease of mounting. It is made of brass and plated 24K gold. This rebuildable stainless steel sprayer offers a 2-pole mounting plate. It allows mono-coil mounting. This wonderful deck system allows the coil to be placed very easily using a pin and tightened with two screws located on the poles.
Coil assembly :
Machined housings on the deck allow for an axis to be positioned up to a diameter of 3mm to place the coil and then simply tighten both legs of the coil by means of two stainless steel screws.
Atomizer chamber :
The atomization chamber is very compact, which gives it a dense vapor that reveals the aromas to the fullest. The Mitico is perfect for lovers of MTL or indirect restrictive vape.
Top caps :
Together with this RDTA, we deliver a top cap that has two air holes, which allows you to play with either one or two open holes. This helps you find your ideal vape.
Materials used :
As with all E-Phoenix products, The Mitico is built using noble materials:
We use 24k gold brass for the electrical connection parts.
For insulators, we always use peek which is the best plastic insulator.
The body and the remaining parts are built using high-quality stainless steel.
The black color treatments are high-quality PVD.
Diameter: 16 mm
Length without drip tip : 21mm
Capacity: 0.5ml tank
Materials: stainless steel, peek, ultem, gold brass
1x The Mitico RDTA 16mm atomizer
1x Replacement gasket kit and screws
1x allen keys
1x drip tip 510 flavor
- Dimensions: 49x80x26mm
- Poids: 114g
- Accu 18650 (non fourni)
- Capacité: Bouteilles silicone noir foodgrade 7ml made by E-Phoenix
- Transistor Mosfet by E-Phoenix
- Connecteur 510 sur ressort pour s adapter a tout les atomiseurs du marcher. Traitement de dorage pour une conductivité optimale
- Chargement possible par micro-USB (câble non fourni)
Voici les informations d’utilisation pour le Mofset: Light indicator： Regular mode：
- Power on device：Green LED light on1.5s
- Power off：Purple light LED light on 1.5s
- Smoking (Press fire button)：Green light LED regular on
- Stop smoking (release the fire button)：LED off
- Over time (Press fire button too long)：Blue LED flash 3 times
- Does not detect atomizer（zero resistance or short circuit，over low resistance or similar to short circuit，Over high resistance – similar open circuit）：Green LED slow flash 5 times
- Resister supporting range 0.1ohm -3.0ohm
- If detect chipset is over heat ：Red ED flash 5 times at fast
- Too lower power before smoke ：Red LED flash slowly 3 times
- When smoking, if low power or Atomizer short circuit ：Red LED quickly flash 1 Second
Charging status and indication ：
- If the battery power less than 30%，read LED flashes
- If the battery power less than 70%，blue LED flashes
- If the battery power is > 70%，green LED flashes
- Fully charged，Green LED keep lighting on
Important: During charging status, it doesn’t support smoke
- Button Descriptions:
A: Fire Button：Joystick Control（Includes UP/DOWN/LEFT/RIGHT AND CENTER button）
A: 0.91 inches OLED Display B: Five modes of work are optional ▲WATT, ▲BYPASS/MECH, ▲NI, ▲TI, ▲SS C: Taste Adjustment(Power Mode Only): The vapors can set the power output curve to achieve the best taste experience.
- Operating Instructions
A：Press the Fire button 5 times in two seconds to switch on or turn off the machine. B: Mode Selection，Click Joystick CENTER” button, then click LEFT or RIGHT to select WATT,BAPASS(MECH),NI,TI, or SS mode, Finally click the Fire button to confirm the selected working mode. C: The Descriptions of each joystick buttons in WATT mode：Click the Joystick LFFT button or RIGHT button to decrease or increase the out power(from 1Watt to 80Watts ). ▲TASTE ADJUSTMENT TASTE ADJUSTMENT only acts on WATT mode，switch off it will output standard power. Click DOWN button to enter TASTE ADJUSTMENT SETTING, there are five power points can be set. On the basis of the current power setting, any one of five power points is adjustable from -30W to +30W, and time interval also can be adjustable from 0.5S to 3S. For example, the current power is set to 30 watts, the first power point is set to +10，the second is set to +05，the third is set to 00，the forth is set to -05 and the fifth is set to -10，time interval is set to 1S. The five power points output are 40Watts + 35Watts +30Watts+ 25Watts+20Watts, and per point time is 1 second. With the TASTE ADJUSTMENT feature, you will be able to enjoy a satisfying vape! ▲POWER PRE-SETTING There are 5 powers preset, i.e. M1-20W/M2-30W/M3-50W/M4-60W/M5-80W, double click FIRE button to enter and then click UP or DOWN to select. D: TEMPERATURE CONTROL MODE SETTING: Click the Joystick left button or right button to decrease or increase the coil temperature(from 100C to 300C). ▲ Celsius to Fahrenheit conversion Press and hold LFET button for setting the temperature at the minimum value, then click the LEFT button once to convert the temperature unit from F to C, or from C to F. ▲ TCR setting：In order to meet the user’s different vaping taste requirements, the user can adjust the coil temperature compensation coefficient. Click UP button to Enter TCR SETTING MENU, then click LEFT or RIGHT to set TCR value, Finally click the Fire button to confirm. E: SYSTEM LOCKED: Press and hold Joystick control CENTER button for three seconds, lock or unlock the system Tip: On the setting menu, double click FIRE button can be exit and go back to the main menu.
- PROTECTION FEATURES
- Output Short Protection : Display“short”
- Low Resistances Protection：”Low RES”
- Over Heat Protection：” TO HOT ”
- Weak Battery Protection: “Weak Battery”
|Input Voltage||3.3Volts||4.3 Volts||Single Battery|
|Output Voltage||1.0Volts||8.0 Volts|
|Output Current||30 A|
|Output Power||1.0 Watt||80 Watts|
|Temperature Limit Fahrenheit||212F||572F|
|Temperature Limit Centigrade||100C||300C|
|Atomizer Resistance||0.08 Ohms||3.0 Ohms|